Acrylic sealer: Vetro 1L=5sqm
Vetro is a protective water-based finish, with a semi-gloss appearance, and is especially designed as a top coat for wall paints, natural lime-based products, decorative paints etc.
The dried film gives the surface beneath it a shiny appearance similar to that of porcelainised surfaces, enhancing its aesthetic appeal. It prevents dirt from building up, and makes the surface washable and weatherproof.
- Australia Wide Delivery
- Huge Range Products
sect. 1.0 Technical characteristics
|Vetro is a protective water-based finish, with a glossy appearance, and is especially design as a top coat for wall paints, plastic coverings, decorative paints, etc.|
The dried film gives the surface beneath it a shiny appearance similar to that of porcelainised surfaces, enhancing its aesthetic appeal.
It prevents dirt from building up, and makes the surface washable and weatherproof.
sect. 2.0 Preparing the surface
|Vetro is suitable for application on indoor wall surfaces. It can be used on paints, varnishes and plastic coverings in dispersion with good adhesion and cleaned with suitable detergents, left to dry completely.|
sect. 3.0 Application method
|It can be applied with a paintbrush or short-haired roller.|
It is only necessary to apply a first coat diluted 90% on 2 coats of Spirito libero. Indeed, it affords good absorption on a smooth surface and would in fact mark the joints if a base coat were not applied first.
It can be applied undiluted on SL with gioia applied on top (dolci seduzioni or seduzioni).
It can be applied undiluted on all non-absorbing surfaces (cds, gioia etc.).
sect. 4.0 Technical characteristics: application
|Dilution/Mixing||Ready for use|
|Tools for application||Roller, Paintbrush|
|Application temperature||The ambient temperature must not be less than +5°C. Do not apply onto hot surfaces or those exposed to sunlight.|
sect. 5.0 Technical characteristics: the product
|Composition||Resins in water dispersion|
|Specific weight||1.050 kg/l|
|pH after 30 days||> 8.5|
|Storage temperature||Store in a sealed pot at a temperature of more than + 5°C.|
|VOC (Directive 2004/42/EC)||0.94 g/litre|
|Pot sizes||1 – 2.5 litres|
|Warnings||There are no known cases of harm to personnel in charge of using this product. Nonetheless, if necessary, please take the following general precautions:|
If inhaled: take the person outside for some fresh air, if the same is having difficulty breathing.
If swallowed: Seek medical advice; only induce vomiting on doctor’s orders; do not administer anything by mouth if the person is unconscious.
Eyes and Skin: wash with plenty of water; if the irritation persists, seek medical advice.
sect. 6.0 Toxicological data
|There are no known cases of health hazards due to exposure to the product. Nonetheless, we recommend you observe the normal rules of industrial hygiene.|